Teknomer 200 Ex Waterproofing Material

Product description
It is a two component, cement and acrylic based, polymer reinforced, fully elastic waterproofing material containing special additives. It is applied internally or externally on concrete, curtain and cement-based plasters against leakage and surface water.

Usage areas
• Residences, shopping malls, hospitals,
• In vertical and horizontal applications indoors and outdoors,
• In foundation insulation and retaining walls,
• In facilities such as spas and baths,
• Water tanks, swimming and ornamental pools,
• On terraces (provided that the top is protected),
• Wet areas such as bathrooms, WCs, balconies,
• It is applied in engineering structures such as subways, tunnels, dams and highways from the direction of water.

Features and Advantages
• Does not require water.
• It can be applied by hand or by spraying.
• Working time is long.
• Does not shrink or crack.
• It can be applied on fresh screed and concrete surfaces thanks to its crack bridging feature.
• Prevents carbonation in concrete
• It can be used in drinking water tanks as it does not contain corrosive and toxic substances.
• Protects concrete against ice melting salts such as calcium and sodium chloride, sea water and carbon dioxide gas.
• It has high resistance to chlorine ions.

Application Notes / Limitations
• Care should be taken not to damage the insulation material mechanically during the coating process.
• Since it is cement based, do not breathe the dust, do not contact the skin and eyes.
• Do not apply on wood, chipboard, mdf, plywood, PVC and metal surfaces.
• Only its own liquid should be used in the mixture. Absolutely no water should be added.
• Foreign materials should not be added.
• Protection is required to achieve the long-term performance expected from the product. After 3 days, tiles, ceramics, plaster, screed should be applied to protect against all kinds of punctures, scratches and impacts that may occur after the application.
• After the application, it should be protected against adverse weather conditions such as direct sunlight, strong wind, high air temperature (over +35 °C), rain and frost. Before the product is fully cured, hands should be cleaned with water and detergent.
• Equipment should be cleaned with water immediately after the application, before it hardens. After the product hardens, it should be cleaned by mechanical methods.
• TEKNOMER 200 EX; After mixing thoroughly and resting for 3 - 5 minutes, it is applied to the water-saturated surface with the help of a brush and/or trowel without losing its moisture. After the first setting of the material, the second layer is applied in the vertical direction of the first layer application. If desired, it can be used as carrier glass fiber reinforcement between floors. Waiting time between coats; After the application of the first layer, when there is no trace on the fingers in the manual control, other layers can be passed.