Teknobond 910 MMA Based Primer and Surface Protector

Product description
MMA based, solvent free, air drying, transparent, impregnating, surface protection and primer resin.

Usage areas
• Airports (runway, apron), ports and shipyards,
• All kinds of industrial areas, workshops and warehouses,
• Inner and outer city roads, bridges, viaducts, pedestrian roads,
• In shopping malls and hospitals,
• In all historical works (mosque, church, castle, column, temple, statue, etc.),
• In prefabricated buildings,
• On surfaces such as concrete, natural stone, asphalt,
• Used as a primer before TEKNOBOND 940 application.

Features and Advantages
• It is MMA based and solvent free.
• It can be applied indoors and outdoors.
• It is very long-lasting and durable.
• It is very easy to apply.
• Resistant to atmospheric conditions.
• It is single component and non-toxic.
• Since the surface is impregnated, it prevents dusting.
• Adherence is very high on the applied surface.

Application Instructions
Surface Quality: Surfaces should be clean, smooth, solid, free from all kinds of dust, oil, dirt, rust, mold oil, detergent, etc. The concrete floor should also be free of puddles, moisture and dampness. It must be a dry ground, the concrete surface moisture must be below 4%.

Surface Preparation: It should be prepared by cleaning with appropriate mechanical surface preparation techniques such as high pressure water jet, vacuum, roughening, sandblasting. It is mixed with a low-speed mixer in a clean container free of all kinds of non-adhesive substances or in its own package until a lump-free homogeneous mixture is obtained. Mixing time is minimum 5 minutes. should be. The prepared mixture should be applied with brush, roller or spraying machines within 5 minutes, depending on the air temperature and environmental conditions. It is recommended to apply at least 2 coats. If the first coat is impregnated on the surface, you can apply the other coats after about 15 minutes (at 15°C). It is recommended to do the application from the bottom up.

The amount of consumption given is theoretical and may vary depending on the application temperature, type of notched trowel used, ceramic type, surface and workmanship. We recommend sample application for consumption control.

Application Notes / Limitations
• It should be protected from sun, rain and frost for the first 1 hour in outdoor applications.
• During the application of the product, work clothes in accordance with the rules of work and worker health should be worn, and appropriate glasses and masks should be used.
• Do not add foreign matter.
• Before the product is fully cured and hardened, hands and skin contact areas should be cleaned with water and detergent. In case of contact with eyes, a doctor should be consulted after washing with plenty of warm water and detergent.
• Equipment should be cleaned with TEKNOTINER immediately after the application, before it hardens. After the product hardens, it should be cleaned by mechanical methods.