Teknobond 200 P R2T Grade Polyurethane Adhesive Paste

Product description
It is a polyurethane-based, two-component, solvent-free, viscous (thixotropic), elastic coating and adhesive paste used for leveling the floor, filling gaps, and multi-purpose bonding.

Usage areas
• In the repair of capillary cracks on concrete surfaces,
• All kinds of industrial floor coverings for chamfering at horizontal-vertical joints,
• On surfaces such as metal, stone, concrete, wood, eternit, glass, tiles,
• In parquet, carpet bonding,
• It can be used for ground leveling.
• It can also be used on surfaces such as Metal, Sheet Metal, Marble and Granite.
• It is used for bonding TEKNOMER DILATATION BAND1.

Features and Advantages
• Easy to apply.
• It is thixotropic, does not flow.
• Resistant to chemicals and aging.
• Solvent free.
• It is waterproof.
• It has a semi-matt and smooth appearance.
• Provides excellent adherence to surfaces such as metal, sheet metal, marble and granite.

Application Instructions
Surface Quality: The application surface must be dry and free from all kinds of dust, dirt, weak and loose particles, cement grout residues, oil and grease. The concrete substrate must be clean, strong and have sufficient compressive strength (at least 25 N/mm2), with a pull-off strength of at least 1.5 N/mm2.

Surface Preparation: The application surface must be compressed air holding, etc., in order to provide the highest adhesion strength. must be cleared using the following methods. The best adhesion is obtained by application with TEKNOBOND 11O polyurethane primer.

Mixing: After adding component B to component A, mix for 2-3 minutes with a low speed electric mixer (maximum 400 rpm) until a homogeneous color is obtained. It varies depending on the workmanship and the roughness of the concrete floor.

Application Notes / Limitations
• Do not use below the minimum allowable temperature for the material to complete its hardening.
• Low temperatures will slow down the curing, while high temperatures will accelerate the curing.
• Pot life will also vary depending on temperatures.
• The product may cause skin irritation. Protective gloves, masks and goggles should be used. Before starting work, a protective cream can be applied to the hands. In case of contact of the mortar with the eyes, the eyes should be immediately washed with warm water and consult a doctor.
• Tools should be cleaned with TEKNOTINER immediately after the application, before they harden. The cured polyurethane grout can only be cleaned mechanically.
• B component is harmful as it contains isocyanate.
• Do not add any foreign matter to the product.
• Component amounts have been adjusted in moderation. Never use less of component A or B.