Teknolatex 100 Adherence Increasing Primer

It is a one-component, alkali-resistant, synthetic resin-based primer used for priming concrete or mortar surfaces before applying mortar and satin paint on it.

Usage areas
• As a primer before satin paint,
• As under-screed primer,
• As a primer under ceramics and tiles,
• Especially before self-leveling TEKNOSELF screed applications,
• It is used as a primer for cement-based boards, gypsum-based boards and concrete panels.

Features and Advantages
• Concrete surfaces; It effectively closes in one step, economically, by preventing water loss into the surface and air bubbles formed in the screed.
• It is useful for indoor and outdoor and humid areas.
• Solvent free.
• Odorless.
• Does not contain chloride, does not harm the reinforcement.
• Ready to use.
• It breathes.
• It prevents dusting.

Application Instructions
The surface is solid, free of loose and loose parts, free of frost, cement slurry, pond water, oil, grease, paraffin, coatings, etc. impurities and other contaminants must be removed and clean. The surface must be prepared by suitable mechanical preparation techniques such as high pressure water or abrasive equipment. All dust, loose and easily crumbled materials should be completely removed before application, preferably with a brush and/or vacuum. Before the TEKNOLATEX 100 application, the surface can be moistened until the surface is saturated with water.
Mix with a low speed mixer for at least 3 minutes in a clean container free of all kinds of non-adhesive substances or in its own package. Apply to the surface by brush, roller and spray.

Application Notes / Limitations
• After the application, it should be protected against adverse weather conditions such as direct sunlight, strong wind, high air temperature (over +35°C), rain and frost. Before the product is fully cured and hardened, hands should be cleaned with water and detergent.
• Equipment should be cleaned with water immediately after the application, before it hardens. After the product hardens, it should be cleaned by mechanical methods.
• The product may cause irritation in contact with the skin. Work clothes, protective gloves, masks and goggles should be used. Before starting work, a protective cream can also be applied to the hand. In case of contact with the eyes, the eyes should be immediately washed with warm water and a doctor should be consulted.
• Do not add foreign matter.
• Pre-testing is recommended for different applications.