Teknorep 520 Natural Hydraulic Lime Based Repair Mortar

Teknorep 520 Natural Hydraulic Lime Based Repair Mortar

Min Order : 22 Ton Prodution Capacity : 22 Ton / Monthly Lead Time :1 Day Availability : Yes Payment Terms : Full Advance Payment Delivery Terms : CFR, DAP Warranty : Yes

Product description
It is a hydraulic lime-based, thixotropic repair mortar, designed for historical buildings, containing harmless natural minerals, fibers and cement-free.

Usage areas
• In the repair or strengthening of historical masonry structures,
• In the repair or rebuilding of masonry domes and vaults,
• In the foundation of the existing historical masonry walls,
• It is used to fill large gaps.
• Repair works carried out to regain the lost bearing capacities of stone, brick or alternate walls,
• In the formation of stone, brick or alternative additions to be made for repair or strengthening,
• It is a repair mortar used for placing carbon rods in wall joints.

Features and Advantages
• It is easy to apply.
• Does not contain cement.
• Adhesion resistance is high.
• They have high mechanical strength.
• Flowering resistance is high.
• Water vapor permeability is high, breathable.
• It can be applied easily and quickly.
• Does not contain water-soluble salts.
• It has low capillary water absorption.

Application Instructions
Surface Quality: The surfaces must be clean, smooth, solid, free of all kinds of dust, oil, dirt, rust, mold oil, detergent, etc. Weak parts on the surface should be removed.

Surface Preparation: Absorbent surfaces should be pre-wetted, but there should be no water puddle.

Mixing: The required amount of water (6.8-7.5 lt water for 20 kg kraft bag) is put into a clean mixing bucket with the help of a scale, and TEKNOREP 520 Repair Mortar is slowly added on it for about 4 minutes with a 400-500 rpm mixer. until mixed.

The prepared mortar is applied to the previously moistened surface with a trowel. In applications where the application will be made in more than one layer, after the previous layer has hardened, each layer should be applied with a maximum thickness of 5 cm. The previous layer must be moistened before the new layer is applied. In applications such as screed and concrete, 30-35% by weight of cleanly washed aggregate with a grain size of 5-20 mm can be added to the fresh mortar.

Application Notes / Limitations
• It should be protected from sun, rain and frost for the first 3 hours in outdoor applications.
• Reaction times are affected by ambient and ground temperatures. Reaction times are shortened in hot environments and longer in cold environments.
• Hot mixing water should be used in cold environments.
• In hot environments, iced mixing water should be used.
• During the application of the product, work clothes in accordance with the rules of work and worker health should be worn, and appropriate glasses and masks should be used.
• After the application, it should be protected against adverse weather conditions such as direct sunlight, strong wind, high air temperature (over +35°C), rain and frost. Before the product is fully cured, hands should be cleaned with water and detergent.
• Equipment should be cleaned with water immediately after the application, before it hardens. After the product hardens, it should be cleaned by mechanical methods.

 
Country / Region   Adana / Turkey Main Products Chemicals Year Established 2010 Production Area 5600 m2 Main Markets North America, Europe
Business Type Manufacturer, Trading Company Trademarks Ayks Chemical
Total Employees 10-40 People Port Mersin Certification ISO 22000
Material Chemical
Packaging Insulated Polystyrene Box
Production Equipment Machine

FAQ

7-10 working days after receiving signed PI and down payment (Will be determined by country.)

Full Advance Payment

We are the manufacturer factory

Mersin Port

Monthly production capacity 450 Tons

We produce quality products. We can produce products of the quality you want. We can make custom production for your brand.

Yeah. We can also work with the insurance company of your choice.


x